Search Contract Opportunities

Toptica - Tunable Diode Laser System

ID: 0000337140 • Type: Synopsis Solicitation

Description

SLAC National Accelerator Laboratory is operated by Stanford University for the Department of Energy. As a management and operating contractor, subcontracts awarded by the Laboratory are not Federal procurements, and are not directly subject to the Federal Acquisition Regulations in 48 CFR. Nonetheless, certain Federal laws, Executive Orders, and regulations may affect our DOE approved purchasing system, as required by statute, regulation, or contract terms and conditions.

SLAC has a requirement for a U.S. domestic end item source of the following product from TOPTICA:

  1. Qty: 1, DLC DL PRO, Tunable Diode Laser system DL pro with digital DLC pro controller
    1. For flexible customization and configuration
    2. DL pro for 5.6 and 9 mm diodes, grating stabilized diode laser in pro design
    3. System to be combined with one of TOPTICA selected laser diodes (www.laser-diodes.com)
    4. Laser diode is specified, integrated and the complete system tested by TOPTICA
    5. Frequency stability << 100 MHz/K
    6. Pro features:
    7. Laser resonator machined from a solid block for enhanced acoustic, temperature and alignment stability and narrow linewidth
    8. Alignment-free coarse tuning
    9. Ideal virtual pivot point for mode hop free tuning
  2. Qty: 1, LD-1250-0100-AR-1, LD (1215-1275)nm, 100mW, AR TE, 9mm, F1+ open can
    1. Specifications in DLC DL pro or similar:
    2. 1215 nm - 1235 nm: > 60 mW ex resonator
    3. 1235 nm - 1265 nm: > 100 mW ex resonator
    4. 1265 nm - 1275 nm: > 60 mW ex resonator
    5. Typical short term linewidth [5 s]: 20 kHz
    6. SUR DL PRO NARROW LW not supported
    7. Ellipticity of collimated beam > 5:1
    8. Combination w. FiberDock or SUR CIRCULAR BEAM requires DL pro head with 300 mm length
    9. Reduced fiber coupling efficiency in MDL pro
    10. Polarization approximately 1:10
  3. Qty: 1, OK-001361, Optical Isolator SSR1250 1200-1300 nm
    1. Isolation (min/typ): 35/43 dB
    2. Transmission (min/typ): 85/92 %
    3. Aperture 4.7 mm
    4. Maximum power density > 4 kW/cm2, max. 40 W cw
    5. Can be integrated in DL pro, MDL pro, DFB pro L, MTA DL/DFB pro, TA pro, BoosTA, BoosTA pro
  4. Qty: 1, FIBERDOCK, Fiber coupler Unit, FC/ACP for direct attachment onto TOPTICA lasers
    1. Extremely stable fiber coupler with all needed degrees of freedom (2 X/Y+Z)
    2. Easy flexure based alignment
    3. Patented design (US 7,321,706, EP 1,666,944)
    4. Including cost for fiber coupler, coupling lens, labour and additional material to install the fiber coupler at the laser head
    5. Fiber not included:
    6. Please specify wavelength, beam diameter and MFD of fiber to be used or order fiber from TOPTICA along with FiberDock. For available SM/PM fibers please contact us or see TOPTICA web page
  5. Qty: 1, OE-000799, Fiber Patchord, SM/PM, FC/AFC 940-1300nm, L=3m, MFD=6.6 m, M2<1.1
    1. typ. NA (5%): 0.11
    2. long life fibers recommended for systems with more than 1W
    3. Longlife fibers can not be used for physical contact (PC) coupling.

The award will be made based upon the attached Lowest Price Technically Acceptable method.

Marking of Proprietary/Confidential Information. Offerors shall properly mark and identify with a restrictive legend or information markings on pages of the proposal that contain Proprietary/confidential information.

For Offeror to be eligible for a subcontract award with the University and the U.S. Department of Energy (DOE), Offeror shall be registered with the System for Award Management (SAM). Entities may register at no cost directly at the SAM website: https://www.sam.gov.

The resulting purchase order shall be performed in accordance with SLAC National Accelerator Laboratory's Terms and Conditions for Fixed Price Commercial Supplies and Services dated March 2023.

NOTE: The following documents are attached in this solicitation.

Buy American Act Certificate

  1. Terms & Conditions for Fixed Price Commercial Supplies and Services, March 2023

Please provide quoted price, delivery, technical compliance statement and certification to the attention of Angela Garcia.

Payment Terms: Net 30 days

Freight terms: FOB Destination Prepaid and Add

Overview

Response Deadline
April 30, 2023, 6:00 p.m. EDT Past Due
Posted
April 14, 2023, 5:56 p.m. EDT
Set Aside
None
Place of Performance
Menlo Park, CA 94025 USA
Source
SAM

Current SBA Size Standard
1250 Employees
Pricing
Fixed Price
Evaluation Criteria
Lowest Price Technically Acceptable (LPTA)
Est. Level of Competition
Low
On 4/14/23 Department of Energy issued Synopsis Solicitation 0000337140 for Toptica - Tunable Diode Laser System due 4/30/23. The opportunity was issued full & open with NAICS 334413 and PSC AG11.
Primary Contact
Name
Angela Garcia   Profile
Phone
None

Documents

Posted documents for Synopsis Solicitation 0000337140

Question & Answer

Incumbent or Similar Awards

Potential Bidders and Partners

Awardees that have won contracts similar to Synopsis Solicitation 0000337140

Similar Active Opportunities

Open contract opportunities similar to Synopsis Solicitation 0000337140

Additional Details

Source Agency Hierarchy
ENERGY, DEPARTMENT OF > ENERGY, DEPARTMENT OF > SLAC Natl Accel Lab -DOE Contractor
FPDS Organization Code
8900-899040
Source Organization Code
500046233
Last Updated
May 1, 2023
Last Updated By
angela.garcia@science.doe.gov
Archive Date
May 1, 2023