Flagger and Barricading Services

Background
The contract is issued by the FAA for Flagger and Barricading Services related to the SEE 17 & 35 PAPI Project at Gillespie Field Airport. The goal of the contract is to ensure safe transportation and erection of barricades along taxiways during specified hours, as well as to provide traffic management through an airport flagger. This service is critical for maintaining operational safety on airports during construction activities.

Work Details
1. The contractor shall transport and erect FAA furnished barricades along Taxiways (TWY) as shown in Attachment 1 between the hours of 9pm and 10pm.
The contractor shall remove the barricades at locations shown in Attachment 1 between the hours of 5am and 6am.
Contractor shall provide nightly pricing rates for a total of 29 shifts (Monday nights to Friday nights).
a. Barricades used will be 10”x10”x96” low profile barricades with two mounted red lights, spaced at 4’ apart, covered with pre-attached orange and white high-intensity reflective striping.
b. Contractor shall use their own vehicles to haul barricades from the project laydown area located along Joe Crosson Drive in El Cajon, CA, following the haul route shown in Attachment 2.
c. All employees driving on the airport must have a valid driver's license and complete a 1-hour self-paced training prior to driving on Gillespie Field Airport.
d. All vehicles used on the airfield must have yellow flashing lights mounted on the highest point, visible from any direction, and must have company markings on each side.
e. Barricades must be transported along the route shown in Attachment 2 – Haul Route.
f. Barricades must be weighed with water to prevent displacement; additional sandbags or anchors may be required where exposed to prop wash or jet blast.

2. Contractor shall provide an airport flagger to safely direct traffic between the hours of 9pm and 6am, providing pricing on a per shift cost for a total of 29 shifts (Monday night through Friday night).
a. Contractor must provide proof of a minimum of one year experience as an airport flagger.
b. Flagger must have a valid driver's license and complete a similar training requirement as above.
c. Flagger vehicle used on the airfield must also meet visibility requirements with yellow flashing lights and company markings.

Place of Performance
Services will be performed at Gillespie Field Airport, specifically along Taxiways (TWY) as indicated in provided attachments.